HONDA

CR85 Race Engine and Supermini Packages

*If full engine rebuild required, add 650 labor plus wear parts, and 150 for crank rebuild labor if rebuilding.

CR85 Mod Stage 1 | $400 labor*
Killer entry level mod - outperforms most shops national packages.
-Cylinder porting and machining
-Head modifications and machining
-Set up notes for jetting, timing and pipe silencer and reed combinations.

CR85 Supermini 102cc Cylinder Conversion | $750 plus wear parts and accessory race parts as needed
-Cylinder Boring
-Cylinder Porting
-Head Machining
-Cylinder Plating
-Piston Kit
-Case splitting, transmission super finishing, case stuffing, blueprint assembly
**HP carb mod available upon request $200 USD

CR125 Modification Packages and Big Bores
The honda is an oldie but boy do we have some special work for them!

CR125 02-07 Mod Stage 1 | $500
Our starter package for the CR125 improves response and power everywhere.
-Cylinder porting stage 1
-Head Mods
-Set up notes on timing and jetting

CR125 05-07 Mod Stage 2 | $1350
This combo is truly incredible for a 125cc engine at an even better price.  Hondas could use a little help in the power department to say the least!
-Cylinder porting stage 2, epoxy work
-Head mods
-Reed cage
-Pipe and silencer combo
-Set up notes on timing and jetting

CR125 01-04 Mod Stage 2 | $1350
While the 01-04 will never be the best 125 out there, it can be MUCH better!
-Cylinder porting stage 2, epoxy work
-Head mods
-Reed cage
-Pipe and silencer combo
-Set up notes on timing and jetting

CR125 134 Cylinder Conversion 00-04 and 05-07 | $ 1000
Our 134 combo drops on stock cases and makes stupid power. If you are racing thr 125 in schoolby 2, local racing, or just want a killer big bore without case mods, this combo is insane.
-Cylinder boring
-144 porting, tailored to each customer
-Powervalve machining
-144 head machining specific to fuel and customer
-Replating
-Piston and gasket kit

CR125 144 Cylinder Conversion 05-07 | $1100
Our CR144 has pushed the amount of power thought possible out of the red rocket.
-Cylinder boring
-144 porting, tailored to each customer
-Powervalve machining
-144 head machining specific to fuel and customer
-Replating
-Piston and gasket kit

CR250 Modification Packages and Big Bores

 CR250 02-04 Mod Stage 1  |  $500
Great overall gains, low price
-Porting Stage 1
-Head Mods
-Set up notes for timing and jetting

CR250  02-04 Stage 2 |  $1000
The 02-04 honda has massive potential, honda just missed some things.
-Porting stage 2
-Head mods
-Carb Mod, jetting
​-Custom Piston
-Set up notes on timing
**we offer a fully set up zeeltronic ignition ready to plug and play

 CR250 05-07 Mod Stage 1  |  $500
-Porting Stage 1
-Head Mods
-Set up notes for timing and jetting

CR250  05-07 Stage 2 |  $1200
The 05-07 honda has incredible potential.  Arguably one of the best dyno performers we have - with great trackside manners.
-Porting Work Stage 2
-Head mods
-Carb Mod, jetting
​-Custom Piston
-Set up notes on timing
**we offer a fully set up zeeltronic ignition ready to plug and play

 CR250 93-01 Mod Stage 1  |  $500
This is the engine that started it all - predecessor to the modern YZ, KX and RM. We can make these run as good as any modern bike and then some!
-Porting Stage 1
-Head Mods
-Set up notes for timing and jetting